1. BASIC ELECTRICAL & ELECTRONICS LAB:
S.NO |
EQIPMENT NAME |
SPECIFICATIONS |
1 |
Regulated Power Supply |
0-30v |
2 |
Function generator |
3 Mhz, |
3 |
3-phase Auto Transformer |
0-240v |
4 |
1-phase R-L Load |
0-240 v |
5 |
Decade Resistance box |
10 ohms to 100k ohm |
6 |
Decade Resistance Box |
10 ohms to 100k ohm |
7 |
Decade Capacitive Box |
100uf to 100kpf |
8 |
Decade Inductive Box |
100uh to 10mh |
9 |
Thevenin’s & Norton’s Theorem kit |
24V,2mA (DC) |
10 |
Superposition Theorem. |
24V,2mA (DC) |
11 |
Voltmeters (Moving Iron type AC) with
|
0-15/30/60v
0-300/600v |
12 |
Ammeters(moving coil DC) with Hi-Q Test Equipment Pvt Limited |
0-200mA
0-20mA |
13 |
Ammeters (Moving Iron AC) with Hi-Q Test Equipment Pvt Limited |
0-3A
0-5/10A
0-10/20A |
14 |
Wattmeter’s with Hi-Q Test Equipment Pvt Limited |
2.5/5A -2 LPF150/300/600V
150/300/600 V,5/10A-2UPF
150/300/600 V,10/20A-2LPF.
|
15 |
Rheostats |
185 OHMS/1.1A |
16 |
Rheostats |
26 OHMS/4.1 A |
17 |
5KVA Servo Stabilizer with SUN seas Technology |
5 KVA |
18 |
Dual Power supply |
30V-2A |
2. POWER ELECTRONICS LAB:
SL.NO |
EQUIPMENT NAME |
SPECIFICATION |
1 |
Static Characteristics of SCR MOSFET &IGBT. |
1-ph a.c supply 230v,50hz,10amp. |
2 |
Determination of characteristics of UJT, Design of UJT, Design of UJT oscillator circuit. |
1-ph a.c supply 230v,50hz,10amp. |
3 |
Determination of E dc & I dc of Half wave & Full wave Rectifiers with R&RL loads. |
1-ph a.c supply 230v,50hz,10amp. |
4 |
Design of SCR circuit for DC-motor control. |
1-pha.c supply 230v,50hz,10amp. |
5 |
Performance of chopper circuit. |
1-ph a.c supply 230v,50hz,10amp. |
6 |
Performance of 1-phase voltage controller for R-RL loads |
1-ph a.c supply 230v,50hz,10amp. |
3.MEASUREMENTS & INSTRUMENTATION LAB:
SL.NO |
EQUIPMENTNAME |
SPECIFICATION |
1 |
Cathode ray oscilloscopes |
30MHZ DUAL TRACE OSCILLOSCOPE MODEL 3706. |
2 |
Function generators |
23OV ,50HZ,2A. |
3 |
Maxwell’s Inductance Bridge |
230V,10AMP,50HZ. |
4 |
Schering Bridge |
230V,10AMP,50HZ. |
5 |
LVDT
Experiment. |
230V,10AMP,50HZ. |
6 |
Strain Gauge. |
230V,10AMP,50HZ. |
4. CONTROLSYSTEMSLABORATORY:
SL.NO |
EQUIPMENT NAME |
SPECIFICATIONS |
1 |
Second order system study Unit. |
1-PHASE AC SUPPLY
230V,10AMP,50HZ. |
2 |
Synchro transmitter receiver. |
1-PHASE AC SUPPLY
230V,10AMP,50HZ |
3 |
PID controller |
1-PHASE AC SUPPLY
230V,10AMP,50HZ |
4 |
Lead-Lag network study Unit |
1-PHASE AC
230V,10AMP,50HZ |
5 |
Speed torque characteristics of DC servo motor. |
1-PHASE AC SUPPLY
230V,10AMP,50HZ |
6 |
Speed torque characteristics of DC servo motor. |
1-PHASE AC SUPPLY
230V,10AM,50HZ |
5. ELECTRICAL CIRCUITS LAB:
SL.NO |
EQUIPMENTNAME |
SPECIFICATIONS |
1 |
Digital multimeters
|
24V DC. |
2
|
Voltage stabilizers. |
230 V, 15 Amps, 50 Hz. |
3 |
Rheostats. |
185 OHMS/1.1 A,
26 OHMS/4.1 A
26 OHMS/5A
28 OHMS/4.5A |
4 |
A kit to verify Kirchhoff’s laws. |
230V,10AMP,50HZ. |
5 |
A kit to verify Thevenin’s and Norton’s theorems. |
230V,10AMP,50HZ. |
6 |
A kit to verify superposition and reciprocity theorems. |
230V,10AMP,50HZ. |
7 |
A kit to verify maximum power transfer theorem. |
230V,10AMP,50HZ |
8 |
1-phase Auto transformer |
230V,10AMP,50HZ |
9 |
1-phase transformer |
230V,10AMP,50HZ |
10 |
1-phase transformer |
230V,10AMP,50HZ |
|